PDA

View Full Version : Updated pic on my site



**DONOTDELETE**
12-14-2001, 05:55 PM
www.eurostreetgraphics.com/silgal.htm (http://www.eurostreetgraphics.com/silgal.htm) http://www.freshalloy.com/

**DONOTDELETE**
12-14-2001, 05:59 PM
sweeeet http://www.freshalloy.com/

12-14-2001, 06:04 PM
Nice. The HotShot manifold looks great. You should tell John at HotShot that if they are so inclined, they could offer the manifold as a KA manifold as well, just by welding on a KA head flange instead of an SR flange (I believe the port spacing is the same)...

I'm curious about your turbo -- do you have the specs on it handy? I'm mostly interested in what trim wheel and what housing A/R you've got on the turbine side. I'm trying to get a feel for how fast the turbo spools, and you're the first person I know of that's using a normal tangential-inlet T4 on an SR.

Asad

[ 12-14-2001: Message edited by: asad137 ]

**DONOTDELETE**
12-14-2001, 09:01 PM
I bought the turbo with the 81 A/R turbine housing for $450 with the delta gate(both new). It also had the turbonecits billet red back plate for the compressor housing. But I ordered a 58 A/R turbine housing ...and Im still waiting for it, sometimes sponsorships=waiting a long time.with the 81 housing I dont see 10psi til 6000rpms then shift @ 7500. this is why I only dynoed @ 270 whp @ 10psi http://www.freshalloy.com/

12-14-2001, 09:15 PM
Yikes! Now that is a lot of lag http://www.freshalloy.com/ Thanks for the info, Ralph.

Asad

KenFuji
12-14-2001, 09:15 PM
hey JdmS13Silvia K's

how much did the mani cost from hotshot?
is that a prototype or do they make the ser mani's? looks up real nice. does the wastegate get in the way of the steering column?

thanks

**DONOTDELETE**
12-14-2001, 09:35 PM
I think the final production manifold will be a little diff. the wastegate is not even close to the stearing. and should run about $550

abailey269
12-14-2001, 10:21 PM
Beautiful car. Have you had it dynoed with the new turbo, GReddy Intake, etc?

Whats your opinion on JWT's reprogram--did you feel it was necessary to get the S-AFC because of JWT lack of personalization to your vehicle?

Later.

-Aubrey

**DONOTDELETE**
12-15-2001, 05:45 AM
Its posted , just look up man.
I got the afc thinking it can be used to run the z32 MAFS. but I have the 1st gen afc, It dont work.
but it has come in handy to richen it at idle and other rpm bands. I for one dont mind the JWT ecu

osofast240
12-15-2001, 07:21 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by JdmS13Silvia K's:
www.eurostreetgraphics.com/silgal.htm (http://www.eurostreetgraphics.com/silgal.htm) http://www.freshalloy.com/<HR></BLOCKQUOTE>

i think we have a 9sec s13

osofast240
12-15-2001, 07:22 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by JdmS13Silvia K's:
www.eurostreetgraphics.com/silgal.htm (http://www.eurostreetgraphics.com/silgal.htm) http://www.freshalloy.com/<HR></BLOCKQUOTE>

whats the weight and hp

nismos13silvia
12-15-2001, 08:06 AM
Great looking setup!!!

$550! Hey, sign me up for one for those Hotshot manifolds. It fits T3/T04E rite?

StealthmodeS14
12-15-2001, 09:25 AM
Christ Almighty that's a beautiful S13......I can't wait to see the car at the upcoming meet......only a week away..hehe http://www.freshalloy.com/

12-15-2001, 09:56 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by nismos13silvia:
Great looking setup!!!

$550! Hey, sign me up for one for those Hotshot manifolds. It fits T3/T04E rite?<HR></BLOCKQUOTE>

The HotShot manifold that Ralph has uses a T4 turbine flange, so it won't work with a T3/T4 (which uses a T3 turbine). Perhaps the flange could be modified to have the T3 bolt pattern as well.

Asad

NOSTALGIC_HERO
12-15-2001, 10:32 AM
ralph, can you take some higher quality pics for us?

thanks, i want to see detail!!!!!! http://www.freshalloy.com/

**DONOTDELETE**
12-16-2001, 12:21 AM
its far from 9 sec, lol
the original manifold is for a t3 flange, but I wanted a t4.
I dont have a great digital camera sorry http://www.freshalloy.com/