PDA

View Full Version : need help from s14 auto to s13 sr20det 5 speed



ssjtt
01-12-2005, 05:07 PM
i've look on http://www.ka24development.com/cwilfert/S14_tranny_swap_electrical.html for the answers i needed but i'm still stumped...from my understanding, correct me if i'm wrong, i've used the plug off of the ka motor and plugged it intot the top fuse connector, then i splice the ends of that wire and connected them...i think thats how it goes...that should allow me to hear the starter at the least...i don't really know if i'm supposed to do the rest of the instructions or not...i think only the first step should at least turn the starter so that i could hear it...but i've tried turning the car on...my car does get power, my ecu wiring is correct...so if anyone has any helpful input...please post here
thank you in advance
-tt

RDM_II
01-12-2005, 09:39 PM
Good lord, that's the jankiest wiring writeup I've ever seen.

Check the solenoid, if you've jumped the top plug there shouldn't be anything else holding you back.