View Full Version : 510 front camber eccentric

01-19-2005, 03:17 AM
I was wondering if anyone knew where I can get adjustable eccentric bushings for the front lower control arm? What about rear?

01-19-2005, 02:43 PM
Do yourself a favor and don't use them, they are pure [censored]. Eccentric bushings on the 510's front suspension layout is a POOR BANDAID for proper camber adjustments. You are FAR better off going to Jerry Claypool or Don at DP Racing and picking up heim jointed control arms, and getting yourself a pair of camber plates or modified strut tops to allow for some camber adjustment.

Take it from someone who ran both aluminum and poly eccentric bushings in their 510. IT'S A WASTE OF TIME AND MONEY. And if things slip with the poly bushings and you don't catch it in time, kiss your front tires goodbye. The $300 you'll spend in a pair of front tires would easily pay for modified stock isolators and a pair of heim jointed control arms, and the increase in NVH is not noticable. (This is in a daily driver 510, too)

01-20-2005, 02:41 PM
Thanks for the advise.