PDA

View Full Version : Looking for KA information (swap to 510)



Demon
04-26-2005, 10:25 AM
Anyone have any electronic information on the swap to a 510? Any websites out there?

scotheocelot
05-17-2005, 09:11 PM
Im an extreme noob here but i think they might have what you are looking for under the dimequarterly website under the tech section. There is a step by step progress of some guy swaping in a KA into his 510. Hope this helps. The website is:

http://dimequarterly.tierranet.com/tech/projectKA/projectKA.html

-scott

Demon
05-19-2005, 04:55 PM
Thanks for the response, I have seen that on-going article but really have no value in it. I was actually looking for specific information in reguards to modifying the mounts on the crossmember, but I am also going with an SR20DET after all since I got a great deal on a bare block (50.00).

datsunfreak
07-24-2005, 07:01 PM
I am also going with an SR20DET after all since I got a great deal on a bare block (50.00).



It's all the stuff that bolts to the block that gets expensive, Dennis. http://forums.freshalloy.com/images/graemlins/grin.gif

Good luck and let me know if I can help at all.

Five10PacksDE
07-25-2005, 06:46 PM
It's all the stuff that bolts to the block that gets expensive, Dennis. http://forums.freshalloy.com/images/graemlins/grin.gif



Hahah, very true. The block is just hte start, a complete setup will probably cost less

Demon
07-25-2005, 10:11 PM
Well after swapping some parts (from my old chevelle) I have almost everything for a long block. I do need an intake manifold, throttle body, ecu, and wiring harness and im good to go. I didnt want the stock manifold, throttle body, ecu, etc.. since I was going to swap it out anyways.

Five10PacksDE
07-27-2005, 06:08 PM
taht is not toobad then. I believe the ka24de throttle is the same. You can upgrade those, but from waht people tell me, the intake mnaifold and trhottle body mods are not really needed unlesss you are over 300+. I got a 3.5" q45 throttle for sale! Hahaha. I doubt u want that

Demon
07-28-2005, 05:50 PM
taht is not toobad then. I believe the ka24de throttle is the same. You can upgrade those, but from waht people tell me, the intake mnaifold and trhottle body mods are not really needed unlesss you are over 300+. I got a 3.5" q45 throttle for sale! Hahaha. I doubt u want that


I do have an 80mm maf, and am possibly going to get a 80mm billet throttle body.