PDA

View Full Version : Tein EDFC Removal



wong
06-19-2005, 06:19 PM
I found it bearable to drive on the hardest setting on my Tein Flex's so I have no use for my EDFC.

Threadlocker was used when assembling the motor head.Is it still removable without stripping the coilover's threads?

The threadlocker used came with the coilovers,i'm not sure what it's strength rating is.

Thanks

Kookz
06-19-2005, 06:31 PM
Threadlocker won't strip anything.

asad
06-20-2005, 07:16 AM
You could try using some sort of solvent that will get in the threads and help loosen the threadlocker. Perhaps acetone would work, but you should make sure it won't dissolve any other parts (plastics, or rubber seals).

Asad

Taylor_Durdan
06-20-2005, 09:28 PM
PB Blaster is a PBA

wong
06-21-2005, 01:50 AM
thanks for the help

got it off today,put a rubber glove on the motor to protect it and spun it off with a hammer