PDA

View Full Version : SR20DET Splitfire DIS



MadMax
12-16-2005, 04:34 PM
Hi,

i've just bought a Splitfire DIS but i have a little problem....
There is the cable going from ignitor chip to the Splitfire amplifier missing!!!
Could someone please help me with a wiring diagram?
( I know they are only 4 cables but i'd like to be sure )

Thanks

ItzGenX
12-16-2005, 09:35 PM
The splitfire unit comes with the amplifier coil controller that has two plugs on it. It should also come with a coilpack harness and four new coils. I think that is it. You unplug and remove the old coil harness and all four stock coils. The other side of that harness which ultimately comes from the ignitor chip via the engine harness will plug directly into the amplifier box. This will leave only one more plug--just plug the supplied coil harness into this remaining plug and hook up all the new coils. That should be it. Don't forget to ground the ground wire.