PDA

View Full Version : Some Turbos for my RB26DETT in a 240sx



Kingtal0n
02-17-2006, 10:42 AM
We are in the process of putting an RB26DETT into a 240sx. I just ordered the N1 water and oil pump, and the turbos just came in today.

http://i23.photobucket.com/albums/b378/draglarry/turbos002.jpg
http://i23.photobucket.com/albums/b378/draglarry/turbos001.jpg

My first problem is I cannot find a compressor map for the TD07-25G turbos. Secondly, I am reading that they are similar to T-67 but I cant find a map for those either. Not sure If I want to run such a seemingly large turbo without knowing where they are going to get efficient and if it will be soon enough- dont want to have to run 30PSI all the time to avoid surge.

My next problem is I cant find an aftermarket large capacity oil pan for the RB26DETT. Greddy JUN etc.. dont seem to make one.

anyways, just thought I would share at the very least the start of something big.

R_SAN_NI
02-17-2006, 06:34 PM
Greddy Makes the Oil Pan Addition for about 260.00, you have to weld it in but it has the extended pick up and all. Also, Tomei does a custom Deal, and you have to trade in yours but it is like 1500.00, and Avance here in Japan does one as well. Your best bet is the greddy, because any shop can weld that in.