PDA

View Full Version : rubber O-ring for the SR injector



02-05-2002, 01:00 PM
You should be able to use the o-rings from a KA24DE injector.

The KA24DE injector o-ring part #'s are

16618-53J00 (small)
16618-10V05 (big)

Looking at the 300ZX parts fiche, it's a little harder to tell what's what, but it seems to show two of the same o-ring:
16618-10V05 (same p/n as the "big" KA24DE o-ring).

Edit: I take that back. For the 95-96 cars, they also show the 53J00 o-ring.

Asad

[ 02-05-2002: Message edited by: asad137 ]

JDMRICE
02-05-2002, 01:05 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by asad137:
You should be able to use the o-rings from a KA24DE injector.

The KA24DE injector o-ring part #'s are

16618-53J00 (small)
16618-10V05 (big)

Looking at the 300ZX parts fiche, it's a little harder to tell what's what, but it seems to show two of the same o-ring:
16618-10V05 (same p/n as the "big" KA24DE o-ring).

Edit: I take that back. For the 95-96 cars, they also show the 53J00 o-ring.

Asad

[ 02-05-2002: Message edited by: asad137 ]<HR></BLOCKQUOTE>

that's why they won't come out correctly...cause i told them 93 z32...

i just found out that the purple injector are only used in 95-96 model...

thanks ASAD..

Richard

ringer
02-05-2002, 01:07 PM
Asad is correct about the usnig KA o-rings. I did just that for my 370cc injectors on my KA+T

Yury S Lyalko
02-05-2002, 01:24 PM
uuninja - i think he needs Sr O rings. The KA might be different.

The SR O rings ar ethe same as the 95 or 96 300ZX TT. Those injectors are the interchangable with the SR20DET.

Just tell the dealer to get a 95 Z part numbers, you shouldbe good to go.


Yury Lyalko www.srswap.com (http://www.srswap.com)

9591
02-05-2002, 01:34 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by BostonS14:
uuninja - i think he needs Sr O rings. The KA might be different.

The SR O rings ar ethe same as the 95 or 96 300ZX TT. Those injectors are the interchangable with the SR20DET.

Just tell the dealer to get a 95 Z part numbers, you shouldbe good to go.


Yury Lyalko www.srswap.com (http://www.srswap.com)<HR></BLOCKQUOTE>

The 95+ TT injectors and the 93+ non-turbo injectors are compatible with the KA. So if the 95+ TTs are also compatible with the SR, then everything must be compatible with everything else ("everything" = "everything that was mentioned above").

Edit: "compatible" = "interchangeable"

[ 02-05-2002: Message edited by: 9591 ]

02-05-2002, 01:45 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by BostonS14:
uuninja - i think he needs Sr O rings. The KA might be different.
<HR></BLOCKQUOTE>

That's why I checked the part #'s, since I knew the late 300ZXTT's had the same injectors as the SR20DET, and they match the KA24DE injector o-rings.

Asad

SRFiveTen
02-05-2002, 01:46 PM
just so we can eliminate any shadow of doubt, injector o-rings for rs13 sr20det are also:-
16618-53J00
16618-10V05

9591
02-05-2002, 02:16 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by SRFiveTen:
just so we can eliminate any shadow of doubt, injector o-rings for rs13 sr20det are also:-
16618-53J00
16618-10V05<HR></BLOCKQUOTE>

This thread is fast approaching "archive" status.

02-05-2002, 02:23 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by 9591:

This thread is fast approaching "archive" status.<HR></BLOCKQUOTE>

Done!

Asad

JDMRICE
02-06-2002, 12:10 AM
i got my apexi 550c.c. injector..but it doesn't come with the O-ring, i don't want o use the one for my old injector...does anyone has the part number from nissan for these o-rings??

correct me if i am wrong, is the SR stock injector the same as 300z turbo injectors?..

ringer
02-06-2002, 12:44 AM
Yeah they are both 370 cc. Which O-ring are you looking for the upper(big) or lower(little)?

JDMRICE
02-06-2002, 12:46 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by uuninja:
Yeah they are both 370 cc. Which O-ring are you looking for the upper(big) or lower(little)?<HR></BLOCKQUOTE>

since i am changing new injectors in...i need both rings..

i went to the nissan dealer and they gave me two big ones...weird...that's why i am looking for the part number http://www.freshalloy.com/