PDA

View Full Version : Brake lines for JDM S14 Calipers?



Sonic180sx
05-11-2006, 11:44 PM
Hey guys, I just got a quick question to clarify before I order my brake lines. Basically I wanted to know if there was any difference between the Z32 and JDM S14 4-piston calipers when it to comes to the fittings of the brake lines. I wanted to make sure that the brake line conversion kit that most places like SRSwap.com and Phase2 sell will fit the JDM S14 4-piston calipers as they are meant for the Z32 calipers. I know that both calipers are essentially the saem, with some mino costemit differences, but I just wanted to make sure. Any help would be greatly appreciated. Thanks.

Nikeboy355
05-12-2006, 12:11 AM
same...

noahrexion
05-12-2006, 01:29 AM
ya they are the same as the z32 calipers (26mm); all of the different variants use the same lines.

Sonic180sx
05-12-2006, 11:39 AM
Thanks for the replies.

YumGTR
12-27-2006, 06:39 PM
anyone know what replacement rotors to use for JDM S14 K's front brakes? i believe pads are just standard z32.

Kim_Jong_Il
12-27-2006, 07:11 PM
z32, 30mm variant.

s14rhd
12-27-2006, 07:39 PM
z32, 30mm variant.Do you know about the rear rotors and pads there the same as us 240's aren't they?

Kim_Jong_Il
12-27-2006, 07:44 PM
Rear silvia brakes are the same as USDM from what I can recall when I was over there.

smracing
12-28-2006, 10:34 AM
s14 and s15 rears are the same as the US rears.

YumGTR
12-28-2006, 11:42 AM
z32, 30mm variant.

is that NA or TT and what year z32?

knowing that would make it easier to walk into an auto parts store, rather than saying "30mm z32". :)

smracing
12-28-2006, 11:58 AM
na, 90-96

Kim_Jong_Il
12-28-2006, 01:15 PM
90 and 91 NA are 26mm, just tell them TT rotors, all years are the same.