PDA

View Full Version : 240sx sr2d0et problem



phase12xs13
08-05-2006, 01:48 AM
i have a 90 nissan 240sx fast back, i just put in the motor, everything is hooked up, intercooler, vac, maf, ecu, etc. the problem that im facing is,
the car cranks, but it does not catch, and after i crank the car the lights on the dash comes on, and will not cut off until i unhook the battery cable. when i checked the the ecu code. it throw a code for 11, or 22
22 is not a engine error code on ecu 63. code 11 is cam angle sensor i believe.
1 can it be wiring
2 can it be cam angle sensor
3 if its wires, what at the possibles.
any suggestion where to look for this

forcefedS13
08-05-2006, 10:09 AM
CAS...thats the code it throws, so thats what id look at., Check the FSM for volatge and such to be sure its correct.

phase12xs13
08-05-2006, 09:03 PM
i checked timing, it was off, then i retimed it. it ran better