PDA

View Full Version : Best way to get to A/T ECU



MS13
05-07-2002, 02:12 PM
From the FSM, the S13 A/T ECU is tucked way inside the passenger side dash. I have removed the main ECU already and I still can't see visually all the mounting holes for the A/T ECU. Looks like the AC motor is in the way.

I am trying diagnose a A/T problem and the FSM calls for probing voltage on the plug of the A/T ECU, but they didn't say exactly what is the best way to get to the damn thing.

Anyone had to do that before? Do you remove the dash and try it from the top or go from the bottom and remove everything in the way?

Thanks

primeral
05-08-2002, 12:53 PM
Originally posted by JH:
...I still can't see visually all the mounting holes for the A/T ECU. Looks like the AC motor is in the way....<font size="2" face="Verdana, Arial[/img]The blower motor should be very easy to drop. On my S14 it's 4 screws holding it up

MS13
05-09-2002, 10:59 AM
Thanks! It just looked like there still isn't enough room to get at it after removing the blower motor... I will give that another try.