PDA

View Full Version : S14 JDM Kouki front bumper swap (Please Help If You Can)



MiamiGrinch240
05-22-2002, 04:44 PM
Sorry, I ran a search but got 37 threads with "kouki bumper" in them and I am in a big hurry so I just thought I would post this. To anyone who has put the JDM Kouki front bumper on their 97 or 98 US 240sx what modifications must be done? I will be getting the front bumper and the JDM turn signals so that I already know. Are there mounting instructions or clearance issues? Thanks to anyone who can help me, again sorry for not reading all the old threads I just don't have the time right now.

MiamiGrinch240
05-23-2002, 06:58 AM
BUMP (Please help if you can I need to know any specific before I throw down all the money for this stuff it is quite expensive.) Thanks again.

big_bada_boom
05-23-2002, 07:02 AM
From what Ive seen, it should bolt right up... when comparing my 98 front w/out bumper with a s14.1 JDM clip my buddy has in ft lauderdale, there weren't many differences. At least as far as I remember http://www.freshalloy.com/

YellowS14
05-23-2002, 07:17 AM
whatsup with the stock one? it looked fine, bodyshop find somthing wrong, or you just wanna be different

TroyC http://www.freshalloy.com/

UK_S14
05-23-2002, 08:20 AM
Sorry for being slightly off topic, but is there any chance you could post the part number for the bumper?

Thanks

MiamiGrinch240
05-23-2002, 10:18 AM
Originally posted by YellowS14:
whatsup with the stock one? it looked fine, bodyshop find somthing wrong, or you just wanna be different

TroyC http://www.freshalloy.com/ <font size="2" face="Verdana, Arial[/img]My stock bumper is just fine. I am just getting specifics before I throw down that kind of cash. Like, is it as low as the stock bumper is with the nissan chin spoiler added? That kind of stuff. And, do the JDM turn signals use the same plug and also do they use the same 1156 bulbs? And do the new turn signals sit next to the fogs or are the fogs eliminated?

[ 05-23-2002, 12:01 PM: Message edited by: MiamiGrinch240 ]

YellowS14
05-23-2002, 11:02 PM
hmm well the front is(guesstimating) about the same as ours, greddy makes a front lip for the jdm one, but its not like the usdm one. the bulbs....dunno, but id imagine just playing with wires shouldnt be too bad(theres only 2)

TroyC http://www.freshalloy.com/

ps i keep looking at that one on jspec, but i just dont like it....im way too picky, and i love my US underspoiler too much

Mav1178
05-23-2002, 11:07 PM
The only thing you should be concerned about is the bumper reinforcement behind the USDM front bumper.

-alex

MiamiGrinch240
05-23-2002, 11:21 PM
Originally posted by YellowS14:
hmm well the front is(guesstimating) about the same as ours, greddy makes a front lip for the jdm one, but its not like the usdm one. the bulbs....dunno, but id imagine just playing with wires shouldnt be too bad(theres only 2)

TroyC http://www.freshalloy.com/

ps i keep looking at that one on jspec, but i just dont like it....im way too picky, and i love my US underspoiler too much<font size="2" face="Verdana, Arial[/img]I like the underspoiler too but if the Silvia bumper stock is just as low as the 240sx with chin then I'll be happy with it. I am not happy with the holes in the front plate portion on the Silvia bumper I would have to have those closed or something.

MiamiGrinch240
05-23-2002, 11:22 PM
Originally posted by UK_S14:
Sorry for being slightly off topic, but is there any chance you could post the part number for the bumper?

Thanks<font size="2" face="Verdana, Arial[/img]Sorry I don't have the part number.