PDA

View Full Version : Need gaskets...



**DONOTDELETE**
06-04-2002, 08:09 PM
I need both intake manifold gaskets (from upper portion to head and lower portion to upper portion), an exhaust manifold gasket (manifold to head), and a valve cover gasket.

A front seal would be nice also.

Any idea where I can get these?

TIA
Kris

v8killer
06-04-2002, 08:48 PM
Originally posted by Kris:
I need both intake manifold gaskets (from upper portion to head and lower portion to upper portion), an exhaust manifold gasket (manifold to head), and a valve cover gasket.

A front seal would be nice also.

Any idea where I can get these?

TIA
Kris<font size="2" face="Verdana, Arial[/img]The gasket from the intake manifold to the head is the same as a 1991-1993 Sentra SE-R. The collector gasket between the plenum and the runners is unique to the RWD manifold.

The exhaust manifold gasket is the same as a 1991-1994 Sentra SE-R or 1995-1998 200SX SE-R.

The front and rear main seals are the same as 1991-1998 SE-R's.

The valve cover gasket is unique to the RWD head.

Call Chris Parker at SR20 Development at 1-619-69-TURBO. That is where I got my valve cover gasket. Make sure to also get the 4 round o-rings for the spark plug holes. The center o-ring is the same as a 1991-1998 SE-R.

Good luck,
Jay Whitely

97 S14
06-04-2002, 08:56 PM
You sure he's needing SR gaskets and not KA gaskets? I'd just go to a local parts store... they can get all those gaskets.

**DONOTDELETE**
06-05-2002, 06:25 AM
Whoops!

Yeah I meant gaskets for the SR. Thanks for the help Jay. How much for the unique gaskets?

v8killer
06-05-2002, 07:05 AM
Originally posted by Kris:
Whoops!

Yeah I meant gaskets for the SR. Thanks for the help Jay. How much for the unique gaskets?<font size="2" face="Verdana, Arial[/img]I don't remember for sure on the prices, but the valve cover gasket was in the neighborhood of $35 or so...plus the cost of the 4 spark plug gaskets. Call SR20 Development and see if they have them or can get them for you.

Good luck,
Jay Whitely