PDA

View Full Version : Z car alloy wheel info?



Ren96240SE
11-04-2000, 01:05 PM
I wanted to put some Z alloys (w/ 225/50-16 all around)on my car. It is a direct swap but I wanted to know if any were made with the Nissan logo or if all of them have the Z logo. I don't feel right about putting Z markings on the 240. Thanks!
p.s.- don't bother suggesting posting this on the z forum, it was there for two weeks and, even though they almost all drive them if they are on there, no one would bother to respond. I've posted questions a few times and never gotten sh*t. Reading through the posts the 240 group seems to be a much friendlier and more helpful bunch than the Z... another (small) reason to own a 240.

**DONOTDELETE**
11-04-2000, 05:05 PM
Have you tried using the 95+ SE center covers on the wheels? It probably won't fit but its worth a shot considering the wheels are both 16" and 5x114.3.

**DONOTDELETE**
11-04-2000, 05:07 PM
Sorry this is assuming the SE wheels had "Nissan" on it. I think they do. I don't remember; I haven't had mine in a long time.

11-04-2000, 07:20 PM
And they have the same center hub bore size (66.1mm)...so who knows, they might fit.

Asad

<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by Tim:
Have you tried using the 95+ SE center covers on the wheels? It probably won't fit but its worth a shot considering the wheels are both 16" and 5x114.3.<HR></BLOCKQUOTE>

C-Kwik
11-06-2000, 10:08 PM
The Z uses a round center cap. The S14 SE uses a sorta pentagonal design. The S14's with 15" alloy(not the steel wheels) used a round center cap though.

mzf
11-07-2000, 12:13 AM
S13 15" alloy wheels have a Nissan center cap. They're 4-bolt but the center cap might still fit.

mzf
11-07-2000, 11:59 AM
My '92 has 15" rims, also has a round center cap.