PDA

View Full Version : a couple easy questions?



**DONOTDELETE**
05-29-2001, 09:15 PM
first is the n1 dual a bolt on exhaust or do you have to get it welded and secondly can i fit a 245/45/17 on a 7.5 inch wheel? this is all for the 91 se

StealthmodeS14
05-30-2001, 02:22 AM
You propably could but the tire would bubble out past the lip of the rim....I like some other people I know like the flush look....propably 17x8 or 17x9 would look better.

**DONOTDELETE**
05-30-2001, 08:43 AM
thanks by the way what is flush with 7.5" wheel righ now i have the stock 6" and have 205's on it and its almost flush so im saying maybe a 225 right? and does anyone know the answer to the N1 dual question?

**DONOTDELETE**
05-30-2001, 09:00 AM
I'm sure it's a bolt on, like most exhaust systems. I'm also looking for wheels. What is a good tire width for 7.5 or 8? Is there a guide somewhere that shows this?

and do 8" wheels fit in the front of a 98 240? and what is a good offset? the wheels I'm looking at arre +45 offset. is that good or bad? thanks.

[This message has been edited by anthony420-240 (edited 05-30-2001).]

97KAT
05-30-2001, 10:08 AM
use 17x9 with 255/40/17 for rear. Use 17x8
with 225/45/17 or 235/45/17 for front.
I think the offset is +34 to +38, I am not totaly sure on the offset though. this provides the close to rolling diameter to the stock tire/rim size/ which should keep speedo correct.
T.Y. what is the offset on your nissmo's?

StealthmodeS14
05-31-2001, 02:25 AM
As for the stock wheel I've got 225's on the back and they bubble out just a little bit....not far from flush but I still don't like the look...purchasing wheels soon so that'll be fixed.

MaxType 240
05-31-2001, 07:01 AM
The dual has a flange which connects to a stock cat. If you don't have the stock cat and don't have one with a flange to mate with it, welding will be required (my experience).

hypercarrots
05-31-2001, 12:45 PM
i've got 17x9 +30 on the rear. that's kind of not between 35 to 38.

<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by '97 S14 SE Turbo:
Front: 17x8+35
Rear: 17x9+38

Front offset ranging from 32 to 35 is good. Rear from 35 to 38 is good.<HR></BLOCKQUOTE>

Mav1178
05-31-2001, 01:48 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by hypercarrots:
i've got 17x9 +30 on the rear. that's kind of not between 35 to 38.

<HR></BLOCKQUOTE>

I think +30 offset is okay, since it gives a flush look with the S14's rear wheel well and fills out the gap nicely.

-alex