PDA

View Full Version : S14 Auto to Manual, parts from front clip??



**DONOTDELETE**
04-11-2003, 03:58 PM
What part can I use from a S13 or S14 front clip for the conversion? Will the clutch pedal, master cylinder, slave cylinder, etc work? I know the lines most likely will not.

Will parts like that (the above) from the S13 car work on the S14 car?

Also, anyone is selling a good manual tranny in the bay area? Parts for the tranny swap?

Thanks in advance.
-Matt

jeremiah
04-11-2003, 06:06 PM
master cylinder looks like it will work, you can most likely use a steel braided line to go to the slave
slave is the same
pretty sure the pedals can be used

**DONOTDELETE**
04-11-2003, 06:40 PM
master cylinder and lines will work. the pedals on the other hand, will not.

iHATEstupidity
04-11-2003, 06:55 PM
master cylinder and lines will work. the pedals on the other hand, will not.



you are quite incorrect. lines will not work because they do not go from a left-side mounted master to a right-side mounted slave. clutch pedal, on the other hand, does work

THINK

**DONOTDELETE**
04-12-2003, 12:49 AM
you are quite incorrect. lines will not work because they do not go from a left-side mounted master to a right-side mounted slave. clutch pedal, on the other hand, does work



you can re-bend the lines to make it work w/ the opposite side. the rhd clutch pedal will work but will not line up with the rest. you can however use the parts off of the clutch pedal and transfer it to a us clutch assembly. brand new from nissan is reasonably priced.