PDA

View Full Version : engine stands



Super13
07-21-2001, 11:28 PM
are these good to rebuild engines with? is it worth the cost and how much is it

**DONOTDELETE**
07-22-2001, 12:08 AM
I would say so, beats dragging the engine block around the garage and trying to balance it on the oil pan. http://www.freshalloy.com/ Check www.summitracing.com (http://www.summitracing.com) or www.jegs.com (http://www.jegs.com) they carry engine stands and hoists. I dont think they are more that $100 but I haven't checked. If you want you could weld your own, i have seen an artical that explained how to make a custom one to wheel you engine around the garage with, and it seemed pretty easy. Any how good luck. http://www.freshalloy.com/

jvh22a
07-22-2001, 09:09 AM
if you look at the recycler.com they have acouple people selling folding hoist,stabilizer, and 4 wheel engine stand for $165- these are new

97 S14
07-22-2001, 10:47 AM
I bought my engine stand from Pep Boys for $75. You dont have to order one by mail...

If you just need a place to store an engine for a while then an empty tire is a perfect place to drop and engine and let it sit... keeps the weight off of the oil pan.

Super13
07-22-2001, 10:49 AM
what are some good things to do when rebuilding / overhauling and engine like the SR20

**DONOTDELETE**
07-22-2001, 06:13 PM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by Super13:
what are some good things to do when rebuilding / overhauling and engine like the SR20<HR></BLOCKQUOTE>

Read the various project articles they have on sr20de.net. For more perspectives and ideas, look into other SCC projects, especially those written up by Mike Kojima. This month's (August 2001) issue of SCC has a particularly thorough article on a pro-grade VG30 buildup.

[This message has been edited by qzp (edited 07-22-2001).]