PDA

View Full Version : 4 lug setup



**DONOTDELETE**
10-27-2001, 01:00 AM
Okay I want cross drilled plates and nissan logo calipers, how do I go about this for a 4 lug wheel setup?

orion
10-27-2001, 04:58 AM
You'll just have to have the rotors drilled to fit the 4 lug pattern...but it's pretty easy b/c the lugs are spaced evenly from the hub. Place the rotors together, line up one hole, mark the others, drill 'em out. I'd suggest a machine shop, though...for accuracy.

The calipers bolt on, and you'll need new lines (or you can adapt your stock lines...)

Remember to CHECK FOR CLEARANCE!!!

Later - Brian

90sr20det
10-27-2001, 10:50 AM
<BLOCKQUOTE><font size="1" face="Verdana, Arial[/img]quote:</font><HR>Originally posted by wav399:
Okay I want cross drilled plates and nissan logo calipers, how do I go about this for a 4 lug wheel setup?<HR></BLOCKQUOTE>

Use/borrow a bench drill. Much more accurate than a regular drill. Use a 1/2" drill bit to make the holes. I just finished putting on some 26mm calipers and rotors. Don't forget to get some custom brake lines from Don at pdm-racing.com. Or maybe you can ask Mike at clearcorners.com to make you some.

Ken