steve shadows
08-01-2006, 12:24 PM
Hi guys if you have followed my recet poop slinging thread on cometic, I am trying to find anyone (shop or individual seller does not matter) who has for sale or trade or anyting of the the above a metal headgasket with a metal 0-ring/grommet around each cylinder.
I was thinking anything made by HKS, APEXI, TOMEI, Power Enterprises, JUN, TODA, BLITZ or anything else for that matter that is not cometic. theses are the parameters...
1. Bore size must match stock bore so 86.5 or 87.0mm bore on gasket
2. Thickness can be anywhere between 0.8mm thickness to 1.4mm thickness but prefer 1.0mm.
3. once again NOT COMETIC and must be **NEW** not used...
email me
steveme7@gmail._com
I was thinking anything made by HKS, APEXI, TOMEI, Power Enterprises, JUN, TODA, BLITZ or anything else for that matter that is not cometic. theses are the parameters...
1. Bore size must match stock bore so 86.5 or 87.0mm bore on gasket
2. Thickness can be anywhere between 0.8mm thickness to 1.4mm thickness but prefer 1.0mm.
3. once again NOT COMETIC and must be **NEW** not used...
email me
steveme7@gmail._com