William@RNissan
05-10-2007, 07:29 AM
Ok,
I know you guys have been onto me about some brake upgrades - I have worked out some pricing on a the first two parts I think everyone needs.
Stainless Steel Lines made by Goodridge - this will increase pedal stiffness and reduce drawback on the pedal from hard braking -
In order to do the group buy I need 7 buyers and the cost is $121.50
Part #2 is Motul Fluid RBS 600. The cost per liter is going to be $13.99 (remember you need three of them)
All types of hydraulic actuated-brake and clutch systems requiring a non-silicone synthetic fluid.
Specially designed to resist to high temperature of racing actuated-brake (steel or carbon) and clutch systems.
Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at - 40°C (-40°F).
PERFORMANCE
STANDARDS : FMVSS 116 DOT 4 / SAE J 1703
Extreme thermal resistance and stability:
The very high boiling point (312°C / 593°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone
base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) enables an effective brake even under extreme
conditions.
Efficient when rainy:
The very high wet boiling point (216°C / 420°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get the phenomena called “ vapour lock ”. The wet boiling point is measured by humidifying the product with about 3.5 % of water.
Please Pm me and I will start the list -
Thank you
I know you guys have been onto me about some brake upgrades - I have worked out some pricing on a the first two parts I think everyone needs.
Stainless Steel Lines made by Goodridge - this will increase pedal stiffness and reduce drawback on the pedal from hard braking -
In order to do the group buy I need 7 buyers and the cost is $121.50
Part #2 is Motul Fluid RBS 600. The cost per liter is going to be $13.99 (remember you need three of them)
All types of hydraulic actuated-brake and clutch systems requiring a non-silicone synthetic fluid.
Specially designed to resist to high temperature of racing actuated-brake (steel or carbon) and clutch systems.
Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at - 40°C (-40°F).
PERFORMANCE
STANDARDS : FMVSS 116 DOT 4 / SAE J 1703
Extreme thermal resistance and stability:
The very high boiling point (312°C / 593°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone
base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) enables an effective brake even under extreme
conditions.
Efficient when rainy:
The very high wet boiling point (216°C / 420°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get the phenomena called “ vapour lock ”. The wet boiling point is measured by humidifying the product with about 3.5 % of water.
Please Pm me and I will start the list -
Thank you