How to take out wiring harness?

[**DONOTDELETE**]

Hey guys/ladees...do you guys know if I have to take off my whole dash to unplug all the plugs from the harness? I'm planning to take out my whole wiring harness and send it out to heavy throttle...let me know if there's an easier way...thanks in advance

[89SX]

Well on my 89 coupe, I had to take out the tube between the fan and the center console. I had to loosen the actual unit that held the fan in, which was like 3 bolts if I remember correctly so I could slide it out of the way enough to actually get the harness out. Apparently I'm the only one because I've never heard of anyone else mentioning this. However it made it a whole lot easier to get it in and out with the fan unit just kinda hanging in there. Don't need to remove it just loosen it so you can wiggle it around a little. That's what I did anyways. The only plug's inside the car is the ecu plug and there's about a 15 wire or so plug attached to the ecu plug(kinda) that goes to your dash, so you don't have to remove your dash.