The Nissan and Infiniti Enthusiasts Site
Results 1 to 12 of 12

Thread: S14 Zenki -> Kouki Conversion Parts @ West Covina Nissan

  1. #1

    S14 Zenki -> Kouki Conversion Parts @ West Covina Nissan

    I've been getting a lot of emails and PMs about conversion parts so I've broke it all down into the parts needed for conversion. I have also included the optional and JDM parts should you choose to go with these.

    Obviously not all parts are necessary (i.e. optional lip). Also the energy absorber from the zenki can be used if you trim it to fit. Some have been able to use the zenki bumper support as well. I listed everything so that should you decide to replace it all or just need particular parts just for replacement they are here.

    Pricing does NOT include freight or tax. For CA customers add 8.25% and if you need shipping I can get you a quote.

    S14 Zenki -> Kouki conversion

    USDM front bumper: F2022-81F25 $216.00
    Requires US turn signals (clear)
    Right 26130-70F25 $44.00
    Left 26135-70F25 $44.00
    or
    JDM front bumper: 62022-JDMK $245.00
    Requires JDM turn signals (amber)
    Right 26120-JDMK $40.00
    Left 26125-JDMK $40.00

    Corner lights: Right 26170-81F25 $35.00
    Left 26175-81F25 $35.00

    USDM headlights: Right 26010-81F25 $167.00
    Left 26060-81F25 $167.00
    or
    JDM headlights Right 26010-JDMK $260.00
    (larger projectors) Left 26060-JDMK $260.00

    Bumper reinforcement bar 62030-81F00 $147.00

    Bumper retainer strip 62290-80F00 $82.00
    Styrofoam energy absorber 62090-81F00 $95.00
    Bumper brackets
    Right 62222-80F00 $6.00
    Left 62223-80F00 $6.00

    USDM grill 62310-81F25 $110.00
    or
    JDM K’s grill 62310-JDMK $125.00

    Headlight brackets (2 required)
    62560-80F00 $75.00 each

    USDM optional front lip 96015-81F00 $270.50
    For USDM front bumper only
    or
    JDM optional front lip K6010-JDMK $389.00
    For JDM K’s bumper only

    Fenders
    Right F3100-80F30 $210.75
    Left F3101-80F30 $210.75

    Hood F5100-81FCM $285.56

    email: justin@thenismoshop.com
    AIM: WestCo Justin
    www.thenismoshop.com

  2. #2
    No JDM rear kouki bumpers (the ones with the slight lip molded in)?
    BUY MY S14 (IN ORLANDO): 96 S14, 18" SSR D5R, COILOVERS, CLEAN
    BUY MY KA-T PARTS, GOOD STUFF NO EBAY JUNK, BRAND NEW: KA-T parts, JGS MANI, T3/T4, N62 MAF, RS-E ECU, 550CC INJECTORS, ETC.

  3. #3
    Quote Originally Posted by Kim_Jong_Il
    No JDM rear kouki bumpers (the ones with the slight lip molded in)?
    Yes, I have four in stock. $225each

  4. #4
    How about JDM Navan aero zenki front bumpers?
    BUY MY S14 (IN ORLANDO): 96 S14, 18" SSR D5R, COILOVERS, CLEAN
    BUY MY KA-T PARTS, GOOD STUFF NO EBAY JUNK, BRAND NEW: KA-T parts, JGS MANI, T3/T4, N62 MAF, RS-E ECU, 550CC INJECTORS, ETC.

  5. #5
    Quote Originally Posted by Kim_Jong_Il
    How about JDM Navan aero zenki front bumpers?
    those things are insanely expensive from Japan, over $500
    I can get them but don't stock them for that reason

  6. #6
    But you stock $500 side view mirrors.

    Touche.
    BUY MY S14 (IN ORLANDO): 96 S14, 18" SSR D5R, COILOVERS, CLEAN
    BUY MY KA-T PARTS, GOOD STUFF NO EBAY JUNK, BRAND NEW: KA-T parts, JGS MANI, T3/T4, N62 MAF, RS-E ECU, 550CC INJECTORS, ETC.

  7. #7
    Quote Originally Posted by Kim_Jong_Il
    But you stock $500 side view mirrors.

    Touche.
    haha, but in their defense the Craft Square mirrors have much better visibility than most aftermarket mirrors due to their width. Gives them functionality

  8. #8
    can you do this conversion using the DRFT front bumper for the Kouki?

  9. #9

  10. #10
    Quote Originally Posted by Chemical*****
    can you do this conversion using the DRFT front bumper for the Kouki?
    As with any OEM front, you can utilize any bumper designed for that front. (i.e. in this case any 97-98 kouki aftermarket bumper will work with this.)

    Quote Originally Posted by WhiteBoyDrew
    pic's
    These are brand new, OEM... looks like this

  11. #11
    Get your website working, YAR!
    BUY MY S14 (IN ORLANDO): 96 S14, 18" SSR D5R, COILOVERS, CLEAN
    BUY MY KA-T PARTS, GOOD STUFF NO EBAY JUNK, BRAND NEW: KA-T parts, JGS MANI, T3/T4, N62 MAF, RS-E ECU, 550CC INJECTORS, ETC.

  12. #12
    Quote Originally Posted by Kim_Jong_Il
    Get your website working, YAR!
    Haha.... Im loading parts as we speak. Anyone want to volunteer?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •